operations.
Steps
1.
On the new power canister, check that the green Power LED is on and the amber Attention LED
is OFF.
2.
From the Recovery Guru in ThinkSystem System Manager, select Recheck to ensure the
problem has been resolved.
3.
If a failed power canister is still being reported, repeat the steps in
Step 2: Remove failed power
canister and in Step 3: Install new power canister. If the problem persists, contact technical
support.
4.
Remove the antistatic protection.
5.
Collect support data for your storage array using ThinkSystem System Manager.
If a problem occurs during this procedure, you can use the saved file to troubleshoot the issue.
The system will save inventory, status, and performance data about your storage array in a
single file.
a.
Select Support › Support Center › Diagnostics.
b.
Select Collect Support Data.
c.
Click Collect.
The file is saved in the Downloads folder for your browser with the name, support-data.7z.
6.
Return the failed part to Lenovo, by following all packaging instructions and using any
packaging materials that are provided.
4.3.5. What’s next?
Your power canister replacement is complete. You can resume normal operations.
4.4. Replace DE6000H fan canister (60-drive)
You can replace a fan canister in a DE6000H array with a 60-drive shelf,
including the following shelf types:
•
DE6000H (4U60) controller shelf
•
DE600S drive shelf
About this task
Each 60-drive controller shelf or drive shelf includes two fan canisters. If a fan canister fails, you
must replace it as soon as possible to ensure that the shelf has adequate cooling.
46
To Next Page
Loading...
