c.
When you find the shelf with a red icon, select Show back of shelf.
d.
Select either fan canister or the red fan icon.
e.
On the Fans tab, look at the statuses of the fan canisters to determine which fan canister
must be replaced.
A component with a Failed status must be replaced.
If the second fan canister in the shelf does not have Optimal status, do
not attempt to hot-swap the failed fan canister. Instead, contact technical
support for assistance.
You can also find information about the failed fan canister in the Details area of the Recovery
Guru, or you can review the Event Log under Support and filter by Component Type.
3.
From the back of the storage array, look at the Attention LEDs to locate the fan canister you
need to remove.
You must replace the fan canister that has its Attention LED on.
48
To Next Page
Loading...
