(1) Controller canister
(2) Cam handle
7.
Using two hands and the cam handle, slide the controller canister out of the shelf.
Always use two hands to support the weight of a controller canister.
If you are removing the controller canister from a DE6000H (2U24) controller shelf, a flap swings
into place to block the empty bay, helping to maintain air flow and cooling.
8.
Turn the controller canister over, so that the removable cover faces up.
9.
Place the controller canister on a flat, static-free surface.
2.2.3. Step 3: Remove failed battery
After removing the controller canister from the controller shelf, remove the battery.
Steps
1.
Remove the controller canister’s cover by pressing down on the button and sliding the cover
off.
2.
Confirm that the green LED inside the controller (between the battery and the DIMMs) is off.
If this green LED is on, the controller is still using battery power. You must wait for this LED to
go off before removing any components.
7
To Next Page
Loading...
