HIC.
4.
In System Manager, locate the Feature Enable Identifier.
a.
Go to Settings › System.
b.
Scroll down to Add-ons.
c.
Under Change Feature Pack, locate the Feature Enable Identifier.
d.
Copy and paste this 32-digit number to a text file.
5.
Go to
Lenovo Feature on Demand, click Storage Host Protocol Change, and enter the
information required to obtain the feature pack.
◦ Feature code
◦ Machine Type
◦ Chassis serial number
◦ Feature Enable Identifier (UID)
6.
Choose whether to receive the key file for the feature pack in an email or download it directly
from the site.
7.2.3. Step 3: Stop host I/O
Stop all I/O operations from the host before converting the protocol of the host ports. You cannot
access data on the storage array until you successfully complete the conversion.
This task applies only if you are converting a storage array that has already been in use.
135
To Next Page
Loading...
