◦ Correct — The battery’s metal flange is completely inserted in the slot on the controller:
◦ Incorrect — The battery’s metal flange is not inserted into the slot on the controller:
2.2.5. Step 5: Re-install controller canister
After installing the new battery, reinstall the controller canister into the controller shelf.
Steps
1.
You reinstall the cover on the controller canister by sliding the cover from back to front until the
button clicks.
2.
Turn the controller canister over, so that the removable cover faces down.
3.
With the cam handle in the open position, slide the controller canister all the way into the
controller shelf.
11
To Next Page
Loading...
