Lenovo ThinkSystem HR630X - Removing And Reinstalling The Rack Handle; Removing And Reinstalling The Server Cover


20

2.2.2REMOVINGANDREINSTALLINGTHERACKHANDLE
Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".
To remove the rack handle, do the following:
1. Turn off all attached devices and the server
2. Disconnect the AC power cord from the electrical outlet
3. Remove screws of rack handle
4. Slide and pull-out the rack handle
To reinstall, reverse the steps above.
2.2.3REMOVINGANDREINSTALLINGTHESERVERCOVER
Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".
To remove the server cover, do the following:
1. Turn off all attached devices and the server.
2. Disconnect the AC power cord from the electrical outlet
3. Unlock the latch with screwdriver (Step 1)
4. Push and rotate the latch (step 2).
5. Pull the cover backwards by rotating the latch to slide it out, then lift to remove the cover (Step 3).
To reinstall, reverse the steps above.