25
7. Unscrew the screws of PCI cage and remove the cage.
PCI Cage Removal
To reinstall, reverse the steps above.
Special Note: Refer to the table below for the specifications and the assigned slots for PCIe cards supported by HR630X.
Slot no. Supported size Slot specifications Remark
1
Half-height,
×8
Support 1xCPU config
Half-length
2
Half-height/,
×16
Support 1xCPU config
Full-height half-length
3
Half-height,
×16
Support 2xCPU config
half-length
2.2.11INSTALLINGORREMOVINGTHEREARHDDMODULE
Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".
To remove rear HDD module assembly, do the following:
1. Turn off all attached devices and the server.
PCIeCardRemoval
t
e1
PCIeCardRemoval
t
e2
PCIeCardRemoval
t
e3