Lenovo ThinkSystem SD530 - BMC Settings

Item Options Description
Boot Option
• CD/DVD Rom
• Hard Disk
• Network
• System Setup
• NONE
Select the one-time boot option for next boot. NONE is
the default setting.
Boot Modes
Change between UEFI boot mode and legacy boot mode.
Item Options Description
System Boot Mode
• UEFI Mode
• Legacy Mode
Drivers, option ROMs and OS loaders the “Boot
Manager” attempt to boot.
[UEFI Mode]: Run UEFI drivers and boot a UEFI OS
loader. UEFI Mode is the default setting.
[Legacy Mode]: Run option ROMs and boot a legacy OS.
Note: This setting will be forced to [UEFI Mode] when
Legacy BIOS is disabled in System Settings->Legacy
BIOS->Legacy BIOS.
Infinite Boot Retry
• Enable
• Disable
Continuously retry the Boot Order. Ensure a bootable
device is specified in “Boot Order”. Disable is the default
setting.
Reboot Systems
Prompt to reboot the system. If Y is pressed, any setup changes will be lost and the system will reboot.
BMC settings
Use this menu to configure the management controller.
Chapter 3. System configuration and boot management 45