Local Link Address N/A
VLAN Support
• Enable
• Disable
Enable VLAN Support to specify the 802.1q VLAN ID on
the management port network device. Disable is the
default setting.
Advanced Setting for BMC
Ethernet
N/A Advanced Setting for BMC Ethernet.
Advanced Settings for BMC Ethernet
Item Options Description
Autonegotiation
• No
• Yes
Choose whether the Data rate and Duplex network
settings are configurable or not. Yes is the default setting.
Data rate Autonegotiation is
‘Yes’:
Auto
Autonegotiation is
‘No’:
100 Mb (Ethernet)
10 Mb (Ethernet)
Amount of data to be transferred per second over LAN
connection.
Duplex Autonegotiation is
‘Yes’:
Auto
Autonegotiation is
‘No’:
Half
Full
Type of communication channel used in your network.
[Full]: Allow data to be transferred in both directions at
once. [Half]: Allow data to be transferred in either one
direction or the other, but not both at the same time.
Maximum Transmission Unit 1500 Specify the maximum size of a packet (in bytes) for the
network interface. The valid range is 68 – 1500. 1500 is
the default setting.
Note: Changes will be valid after saving network settings in previous page.
System event logs
Use this menu to clear or view the System Event Log.
48 ThinkSystem Server with Intel Xeon SP (1st, 2nd Gen) UEFI Manual
To Next Page
Loading...
