Lenovo ThinkSystem ST250 V3 - System-Board Leds

CRPS power supply LED
Figure 16. CRPS Power supply LED
LED Description
1 Power supply
status
The power supply status LED can be in one of the following states:
• Green: The power supply is connected to the AC power source and working normally.
• Off: The power supply is disconnected from the AC power source.
• Slow blinking green (about one flash every second): The power supply is in PSU standby state
with AC present, cold standby state, or always standby state.
• Amber: The AC power cord is unplugged, AC power lost (with a second power supply in
parallel still in AC power input power), or power supply has failed. To resolve the issue, replace
the power supply.
• Slow blinking amber (about one flash every second): Power supply warning events where the
power supply continues to operate.
• Fast blinking green (about 2 flashes each second): Power supply firmware updating.
System-board LEDs
The following illustrations show the light-emitting diodes (LEDs) on the system board.
Press the power button to light the LEDs on the system board when the power source has been removed
from the server.
34
ThinkSystem ST250 V3 System Configuration Guide