Lenovo ThinkSystem ST250 V3 - Technical Specifications

Specification
category
Technical specifications Mechanical specifications Environmental specifications
Content
• Processor
• Memory
• M.2 Drive
• Storage expansion
• Expansion slots
• Integrated functions and I/O
connectors
• Network
• Rear button
• RAID adapter
• Host bus adapter
• System fan
• Electrical input
• Minimal configuration for
debugging
• Operating systems
• Dimension
• Weight
• Acoustical noise emissions
• Ambient temperature
management
• Environmental
Technical specifications
Summary of the technical specifications of server. Depending on the model, some features might not be
available, or some specifications might not apply.
Processor
• This server supports one of the following Intel
®
processors:
– Xeon
®
E
– Pentium
®
• Designed for LGA 1700 socket
• Scalable up to 8 cores per socket
• Supports TDP up to 95W
For a list of supported processors, see:
http://datacentersupport.lenovo.com.
Memory
See “Memory module installation rules and order” in User Guide or Hardware Maintenance Guide for detailed
information about memory configuration and setup.
• Minimum: 16 GB
• Maximum: 128 GB
• Slots: four DIMM slots (two channels, two DIMMs per channel)
• Memory module type:
– TruDDR5 4800MHz UDIMM: 16 GB (1Rx8)
– TruDDR5 4800MHz UDIMM: 32 GB (2Rx8)
Note: Memory operates at up to 4400 MHz, depending on “Memory module installation rules and order” in User
Guide or Hardware Maintenance Guide.
For a list of supported memory modules, see:
https://serverproven.lenovo.com.
4 ThinkSystem ST250 V3 System Configuration Guide