Lenze 8201

Commissioning
5-10 UOMu_^MVMO
Help for decision Motor cable
screened ≤25 m
unscreened
≤50 m
screened > 25 m
unscreened > 50 m
C014
Single drives
recommended alternatively recommended alternatively
With constant load -0- -2- -2- -
With changing loads -0- -2- -2- -
With heavy start conditions -0- -2- -2- -
High dynamic posotioning and feed drives -0- - -2- -
Lifts and hoists -0- -2- -2- -
Pumps and fan drives -1- -3- -3- -2-
Three-phase reluctance motors -2- - -2- -
Three-phase sliding rotor motors -2- - -2- -
Three-phase motors with assigned
frequency-voltage characteristic
-2- - -2- -
Group drives (depending on the resulting
motor-cable length)
ä
êÉë
= á

⋅ Eä
N
+ ä
O
+  + ä
á
F
Simitas motors and loads -2- - -2- -
Different motors and/or changing loads -2- - -2- -
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com