Need help?Do you have a question about the Lenze 8200 motec Series and is the answer not in the manual?
Defines conventions for numbers, warnings, icons, and references.
Explains pictographs and signal words for dangers and important information.
Specifies intended use and limitations for the frequency inverter.
Provides fundamental safety guidelines for Lenze drive and automation components.
Outlines safety and application rules for Lenze low-voltage motors.
Details potential dangers like electrical voltage, moving parts, and hot surfaces.
Lists conformity, approvals, protection types, EMC requirements, and environmental conditions.
Specifies power ratings, currents, and voltage ranges for normal operation.
Provides physical dimensions and weight specifications for the motec and fan module.
Guides on mounting the motec directly onto a motor or geared motor.
Instructions for mounting the motec unit onto a wall surface.
Details the process of mounting the motec onto a motor.
Covers connecting the drive controller to the mains power supply.
Explains how to connect relay outputs for control signals.
Details connecting the digital switching output for specific device versions.
Guides on installing optional function modules into the motec.
Covers the assembly steps for the motec unit with or without modules.
Lists essential checks before powering up the drive controller.
Describes how to choose between V/f, vector, and sensorless torque control modes.
Explains how to configure parameters using the diagnosis terminal.
Provides step-by-step instructions for setting up linear V/f control.
Guides on setting up and optimising vector control for the drive.
Details various parameter codes and their functions for configuration.
Lists common maloperations and their causes/remedies.
Explains error codes, LED indicators, and fault messages.
Describes the meaning of LED indicators for controller status.
To Next Page
General