Need help?Do you have a question about the Lenze Motec 8200 and is the answer not in the manual?
General| Category | DC Drives |
|---|---|
| Series | 8200 |
| Communication | CANopen |
| Output Power | 0.2 to 7.5 kW |
| Input Voltage | 3 x AC 380...480 V |
| Output Voltage | 24V DC |
| Protection Features | overvoltage, undervoltage, short circuit |
| Storage Temperature | -20°C to +70°C |
| Relative Humidity | < 95%, non-condensing |
| Weight | Varies by model |
General safety and application notes for Lenze controllers.
General safety and application notes for three-phase AC motors.
Identification of residual hazards and safety instruction layout.
Checks and preparations before initial power-on.
Identifying and resolving common drive operational faults.
Understanding system error messages and LED indicators.
To Next Page