Lenze 8400 motec Series - Network Management Telegram (NMT)

Parameter setting5

40
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 3.1
5 Parameter setting
Parameterisation serves to adjust the controller optimally to different
application requirements.
Parameters can be set as follows:
Parameter setting with L−force »Engineer«
ƒ Extensive settings via software
– Requires software and USB diagnostic adapter
Parameter setting with diagnosis terminal/keypad
ƒ Setting of special parameters by experienced users
– Requires a diagnosis terminal suitable for the 8400 motec