Mechanical installation
Arrangement of the devices
4
42
EDK94ZPP0364 ZH/EN 2.0
A DC-bus connection has to be planned and dimensioned taking the technical
data into account.
How to arrange the devices via the DC busbars for operation in the DC-bus
connection:
ƒ Arrange the devices in a row from left to right.
ƒ Install the supplying device on the left:
– DC power supply module (in a first row),
– DC input m odule (in the following rows).
ƒ Install the multi drive axis controllers to the right from the highest to the
lowest power (recommendation).
ƒ For increasing the braking power also single drive axis controllers can be
integrated. For this purpose these axis controllers have to be equipped
with the optional busbar mounting set (E94AZJAxxx).
To Next Page
Loading...
