To Next PageTo Next Page
Need help?Do you have a question about the Lenze L-force E94AMHE Series and is the answer not in the manual?
General| Series | E94AMHE |
|---|---|
| Category | Servo Drives |
| Protection class | IP20 |
| Relative humidity | 5% to 95% (non-condensing) |
| Communication interfaces | EtherCAT, PROFIBUS, PROFINET, Ethernet/IP |
| Cooling method | Forced cooling |
| Ambient temperature range | 0...+45 °C (with derating up to +55 °C) |
| Storage temperature range | -25 °C to +70 °C |
| Input voltage range | 3 x 230 V to 3 x 480 V |
Explains writing styles and symbols used for information types.
General safety warnings, protection of persons, device, motor, and system.
Parameters for adapting motor and controller for optimal performance.
Process to optimize inverter switching for better drive features.
Setting motor parameters for sensorless vector control or servo control.
Overview of fundamental drive functions like stop, quick stop, and limiters.
Defines terminal assignments for speed control and manual jog functions.
Defines terminal assignments for torque control and manual jog functions.
Terminal assignments for positioning sequences and table positioning.
Terminal assignments for electronic gearbox and synchronism functions.
Terminal assignments for the CiA402 device profile.
Safety considerations for using controllers in lift applications.
Requirements for fan applications in sensorless modes, including flying restart.
Explains the meaning of LEDs on the controller's front panel.
Details error responses, controller states, LED indications, and reset procedures.
