To Next PageTo Next Page
Need help?Do you have a question about the Lenze EVS9323-ES and is the answer not in the manual?
General| Type | Servo Drive |
|---|---|
| Control Method | Vector Control |
| Rated Output Current | 23 A |
| Rated Current | 23 A |
| Rated Power | 7.5 kW |
| Protection Class | IP20 |
| Communication Interface | CANopen |
| Power Supply Voltage | 3 x 230...480 V AC |
General safety instructions, application directives, transport, storage, installation, and electrical connection guidance.
Details residual hazards related to person protection, device protection, overspeeds, and parameter set transfer.
Lists detailed rated data for various 93XX controller types, including voltage, current, and power.
Covers important notes for installation, free space, and possible mounting positions.
Covers protection of persons, insulation, fuses, mains disconnection, controller, and motor protection.
Steps to perform before initial switch-on, including wiring checks and connection verification.
Explains how to enter motor nameplate data for optimal drive performance using codes.
Explains how the controller derates output current based on frequency and temperature.
Detailed guide on using the keypad for parameter setting, including LCD display.
Guidance on recognizing and analyzing faults using controller LEDs, diagnostics, and keypad messages.
A table listing fault codes, their causes, and remedies for diagnosing issues.
A reference table for understanding and using controller codes for parameter setting.
