Lenze E94AYCET

14 Parameter reference
14.3 Parameters of the communication module for slot MXI2
128
Lenze · E94AYCET communication module (EtherCAT®) · Communication Manual · DMS 10.2 EN · 11/2018 · TD06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14540
C14784
C14789
Parameter | Name:
C14540 | Mapping entries TPDO-10
Data type: UNSIGNED_64
Index: 10035 = 0x2733
This code is for device-internal use only and must not be written to by the user!
Subcodes 1 ... 32 specify the mapping for the TPDO channel 10.
• Servo Drives 9400 exclusively support mapping objects with a data length of 8 bits (1 byte) or a multiple of this
value. Incompatible objects must be mapped to variables with a compatible data length.
• The master must have the same mapping entries as the slave.
Structure of the mapping codes
( 66)
Value is bit-coded: Info
Bit 0 Bit 0
... ...
Bit 63 Bit 63
Subcodes Lenze setting Info
C14540/1 0 1. Mapping entry TPDO-10 (I-1A09.01)
... ... ...
C14540/32 0 32. Mapping entry TPDO-10 (I-1A09.20)
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14784 | Active TPDO channel
Data type: UNSIGNED_8
Index: 9791 = 0x263F
This code is for device-internal use only and must not be written to by the user!
Selection of the active TPDO channel
Selection list Info
0No TPDO
1 TPDO-1 (I-1A00)
... ...
10 TPDO-10 (I-1A09)
Subcodes Lenze setting Info
C14784/1 1: TPDO-1 (I-1A00) Active TPDO channel
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14789 | No. of TPDO mapping entries
Data type: UNSIGNED_8
Index: 9786 = 0x263A
This code is for device-internal use only and must not be written to by the user!
Subcodes 1 ... 10 specify the number of valid mapping entries of TPDO channels 1 ... 10 (valid subcodes in
C14531
... C14540).
Setting range (min. value | unit | max. value)
032
Subcodes Lenze setting Info
C14789/1 0 No. of mapping entries for TPDO-1
... ... ...
C14789/10 0 No. of mapping entries for TPDO-10
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT