Lenze ECSxK001 series User Manual

Commissioning
Entry of motor data for Lenze motors
6

110
EDBCSXA064 EN 3.2
ECSXA302
Fig. 6−5 GDC view: Motor selection
3. Select the connected motor from the list (see motor nameplate).
– The corresponding motor data is displayed in the "Motor data" fields on the right.
4. Click the [ Complete ] button.
– The data is transferred to the controller. This process can take a few seconds and is
confirmed by a message after being completed.

Lenze ECSxK001 series Specifications

General

Brand	Lenze
Model	ECSxK001 series
Category	Control Unit
Language	English