Lenze ECSxK001 series User Manual

Preface and general information
Features of the ECSxA
1

18
EDBCSXA064 EN 3.2
1.2 Features of the ECSxA axis module
ƒ Safety function "safe torque off" (formerly "safe standstill")
ƒ PLC programming according to IEC 61131−3 with the Lenze software "Drive PLC
Developer Studio" (DDS)
ƒ Functions that can be used in your projects are available as system blocks(SB).
– Chapter "1.5 Introduction of system blocks" ( 21)
– Chapter "13 System blocks" ( 255)
ƒ Double CAN ON BORD
– Interface X4 "CAN" (PDO1, sync−based)
– Interface X14 "CAN−AUX"
ƒ Automation interface (AIF)
– Connection to other fieldbus systems with Lenze communication modules
(e.g. EMF2133IB PROFIBUS−DP)
– Connection of the XT EMZ9371BC keypad for parameter setting and diagnostics
ƒ Supported feedback systems:
– Resolver with and without position storage
– Encoder (incremental encoder (TTL encoder), sin/cos encoder)
ƒ Commissioning, parameter setting and diagnostics with the Lenze parameter
setting and operating program "Global Drive Control" (GDC) or the XT EMZ9371BC
keypad

Lenze ECSxK001 series Specifications

General

Brand	Lenze
Model	ECSxK001 series
Category	Control Unit
Language	English