Need help?Do you have a question about the Lenze E94AYCEO and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Type | E94AYCEO |
| Manufacturer | Lenze |
| Input Voltage | 24 V DC |
| Operating Temperature | 0°C to +55°C |
| Storage Temperature | -25°C to +70°C |
| Protection Class | IP20 |
| Weight | 0.5 kg |
| Product series | 9400 |
| Power Consumption | 5 W |
| Relative Humidity | 5% to 95%, non-condensing |
| Dimensions | 100 x 50 x 120 mm |
General safety guidelines for Lenze drive components.
Safety instructions specific to the device and its applications.
Details potential hazards related to personal and device protection.
Lists the key features and capabilities of the EtherNet/IP module.
Presents general technical specifications and operating parameters.
Information on protective insulation measures and electrical safety.
Covers wiring, network topology, and Ethernet cable specifications.
Safety checks and pre-commissioning steps before system power-up.
Methods for configuring IP addresses for the Servo Drive.
Detailed steps for writing parameter values using explicit messages.
Detailed steps for reading parameter values using explicit messages.
Detailed causes and solutions for various EtherNet/IP errors.
Comprehensive list of parameters for the communication module in slot MXI1.
Comprehensive list of parameters for the communication module in slot MXI2.
To Next Page
