Need help?Do you have a question about the Lenze SM100 E94AYAB and is the answer not in the manual?
General| Brand | Lenze |
|---|---|
| Model | SM100 E94AYAB |
| Category | Control Unit |
| Language | English |
Introduces fundamental concepts of safety engineering in industrial automation.
Explains functional safety and drive-based safety measures for personnel protection.
Describes using safety modules with L-force 9400 controllers for machine safety.
Lists and defines key terms and abbreviations related to safety engineering.
Explains pictographs, signal words, and safety instructions used in the documentation.
Details application, installation, and commissioning safety instructions for the safety modules.
Covers operational checks, functional tests, and residual hazards after installation.
Discusses potential residual motor movement due to transistor short-circuits.
Explains the importance and principles of hazard analysis for machine safety.
Mentions the role of laws, guidelines, and expert opinions in safety regulations.
Provides safety notes and warnings for UL/UR approved systems.
Introduces passive sensors, their characteristics, and wiring principles.
Describes active sensors (OSSD outputs), their monitoring, and examples.
Identifies the slot designation (M4) for safety modules in the controller.
Illustrates the physical mounting procedure for a module.
Illustrates the physical dismounting procedure for a module.
Explains procedures and considerations for exchanging safety modules.
Explains how safety modules function, particularly STO (Safe Torque Off).
Describes the SMO module, its lack of safety functions, and its purpose.
Provides the type designation and basic function of the SMO module.
Details the operational aspects of the SMO module and its limitations for safety.
Introduces the SM100 safety module and its primary function.
States the type designation of the SM100 safety module.
Details the "Safe torque off" function of the SM100 module and associated warnings.
Outlines the safety standards (ISO 13849-1, IEC 61508) met by the SM100.
Describes the physical elements of the SM100 module, including LEDs.
Explains the meaning of the EN and DE LED displays on the SM100 module.
Provides technical specifications for the SM100 module's inputs, outputs, and voltage.
Details the marking, description, and electrical data for the X80 terminal signals.
Specifies conductor cross-section and tightening torque for terminal connections.
Provides specific stripping length requirements for terminal connections.
Lists module mapping between hardware versions for module exchange.
Provides detailed electrical specifications for SM100 terminal inputs and outputs.
Shows the truth table for SM100 inputs (SIA, SIB, DO1) and the enable state.
Outlines commissioning steps, including basic device settings and safety checks.
Presents the TÜV Rheinland test certificate for the SM100 safety module.
Explains the machine manufacturer's responsibility to verify safety function operability.
Defines the qualifications required for the person performing the safety function test.
States that safety function test results must be documented and signed.
Details the components of a complete safety function test, including documentation and functional testing.
Describes the need for periodic inspections of safety-oriented functions and their intervals.
To Next Page