Lenze E94AYCEO - Conventions Used

Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17 8
1 About this documentation
1.2 Conventions used
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Conventions used
This documentation uses the following conventions to distinguish between different types of
information:
Type of information Identification Examples/notes
Numbers
Decimal Standard notation Example: 1234
Decimal separator Point In general, the decimal point is used.
Example: 1234.56
Hexadecimal 0x[0 ... 9, A ... F] Example: 0x60F4
Binary
• Nibble
In inverted commas
Point
Example: ’100’
Example: ’0110.0100’
Text
Version information Text colour blue All pieces of information that only apply to or from a specific
software version of the device are highlighted accordingly in
this documentation.
Example: This function extension is available from software
version V3.0!
Program name » « The Lenze PC software »Engineer«...
Control element Bold The OK button... / The Copy command... / The Properties
tab... / The Name input field...
Sequence of menu
commands
If several successive commands are required for executing a
function, the individual commands are separated from each
other by an arrow: Select the command File
 Open to...
Hyperlink Underlined
Optically highlighted reference to another topic. Can be
activated with a mouse-click in this online documentation.
Icons
Page reference ( 9) Optically highlighted reference to another page. Can be
activated with a mouse-click in this online documentation.
Step-by-step instructions

Step-by-step instructions are marked by a pictograph.