Lenze E94AYCEO - Product description

3 Product description
3.1 Application as directed
13
Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Product description
3.1 Application as directed
The EtherNet/IP communication module ...
• is an accessory module that can be used in conjunction with the following standard devices:
• is a device intended for use in industrial power systems.
• should only be used under the operating conditions prescribed in this documentation.
• can only be used in EtherNet/IP networks.
Any other use shall be deemed inappropriate!
3.2 Identification
The type designation and hardware and software version of the communication module are
specified on the nameplate:
[3-1] Identification data
Product series Type designation From hardware
version
From software
version
Servo Drives 9400 HighLine E94AxHExxxx 1A 04.00
Servo Drives 9400 PLC E94AxPExxxx VA 02.00
Regenerative power supply module E94ARNxxxx VA 01.00
E94YCDN005
1 Type designation (type)
E94 Product series
AVersion
Y Module identification: Extension module
C Module type: Communication module
EO EtherNet/IP
2 Hardware version (HW)
3 Software version (SW)