Lenze EMF2133IB User Manual

EDSMF2133IB
.G÷h
Ä.G÷hä
Communication Manual
PROFIBUS−DP
l
EMF2133IB
Communication module
L−force Communication

Lenze EMF2133IB Specifications

General

Brand	Lenze
Model	EMF2133IB
Category	Control Unit
Language	English

Summary

Safety Instructions

General Safety Information

Outlines fundamental safety measures for using Lenze components.

Device and Application-Specific Safety Instructions

Details safety measures relevant to the communication module and its application.

Residual Hazards

Identifies potential dangers remaining after safety measures are applied.

Technical Data

Protective Insulation

Details the electrical insulation specifications for safety compliance.

Installation

Mechanical Installation

Instructions for physically mounting and attaching the communication module.

Electrical Installation

Details the wiring and electrical connections for the communication module.

Commissioning

Before Switching On

Initial Switch-On

Step-by-step guide for the initial power-up and configuration.

Configuring the Host System (Master)

Instructions for configuring the PROFIBUS master system for communication.

Preparing the Standard Device for Communication

Steps to prepare the main device for PROFIBUS communication.

Setting the Node Address

Process Data Transfer

Lenze Device Control

DRIVECOM Control

Details the DRIVECOM protocol and its implementation.

PROFIdrive Control

Explains the PROFIdrive protocol and its implementation.

Parameter Data Transfer

DRIVECOM Parameter Data Channel

PROFIdrive Parameter Data Channel

Diagnostics

Troubleshooting and Fault Elimination

Provides guidance for diagnosing and resolving issues.

Monitoring with Interrupted PROFIBUS Communication