Lenze EPL1020 Series - 1 About this Documentation

About this documentation1

40
EDK10200EV3 DE/EN/FR 7.1
1 About this documentation
Contents
This documentation provides ...
ƒ Information about the mechanical and electrical installation of the Drive PLC;
ƒ Information about the commissioning of the Drive PLC;
ƒ Safety instructions that must be observed;
ƒ Technical data.
Validity information
The information given in this documentation is valid for the following devices:
PLC Type designation From hardware version From software version
Drive PLC EPL1020x−El 1B 2.0
Target group
This documentation is intended for persons who install and commission the described
product according to the project requirements.
 Tip!
Documentation and software updates for further Lenze products can be
found on the Internet in the "Services & Downloads" area under
http://www.Lenze.com