Lenze EPL1020 Series - Electrical Installation; EMC-Compliant Installation Guidelines

Electrical installation
EMC−compliant installation
6

57
EDK10200EV3 DE/EN/FR 7.1
6 Electrical installation
EMC−compliant installation
PES
PES
PE
PE
PE
1
3
0
120
2
plc013

Mounting plate with electrically conductive surface.

Ground the cable shield with a large−area connection to PE (PES: HF shield connection via PE
connection).
Use the enclosed fixing brackets.

Signal cable for analog input and output signals.
Always use a shielded cable.

Signal cable for the system bus (CAN), with bus terminating resistor (120 W).
Always use a shielded cable.