Lenze EPL1020 Series - Residual Hazards and Protective Measures

Safety instructions
Residual hazards
2

46
EDK10200EV3 DE/EN/FR 7.1
Residual hazards
 Danger!
Mounting and installation of the Drive PLC may only be carried out in
de−energised state!
 Stop!
Electrostatic discharge
Electronic components within the Drive PLC can be damaged or destroyed by
electrostatic discharge.
Possible consequences:
ƒ The Drive PLC is defective.
Protective measures
ƒ Free yourself from any electrostatic charge before you touch the Drive
PLC.
 Stop!
Save cyclic parameter set
With "Save cyclic parameter set", the EEPROM can be damaged or destroyed.
Possible consequences:
ƒ The Drive PLC is defective.
Protective measures
ƒ Do not execute "Save cyclic parameter set"!