Lenze EPL1020 Series - System Bus (CAN) Wiring

Electrical installation
Wiring of the system bus (CAN)
6

63
EDK10200EV3 DE/EN/FR 7.1
Wiring of the system bus (CAN)
 Stop!
Only connect terminals of the same designation.
PES
PES PES
GND LOW
HI
7 LO
HI
7 LO
HI
7 LO
HI
7 LO
HI
120Ω 120Ω
01
Drive PLC
plc014

Controller 1

Controller 2
PES HF shield termination through PE connection
Features of the system cable:
Total cable length up to 300 m 300 to 1000 m
Cable type
LIYCY 2 x 2 x 0.5 mm
2
CYPIMF 2 x 2 x 0.5 mm
2
Twisted pair with shielding
Pair 1: CAN−LOW (LO) and CAN−HIGH (HI)
Pair 2: 2 GND
Cable resistance £40 W/km £40 W/km
Capacitance per unit length £130 nF/km £60 nF/km