Electrical installation
Terminal strips on the bottom of the device
6
62
EDK10200EV3 DE/EN/FR 7.1
Note!
ƒ A detailed description of how to invert the digital input and output levels
can be found in the section "DIGITAL_IO" of the Manual for the Drive PLC
Developer Studio (DDS).
ƒ Use the function block L_AIN or L_AOUT to adjust the analog input and
output signals. A description of this can also be found in the section
"Standard Library 9300 Servo PLC" of the DDS Manual.
To Next Page
Loading...
