Commissioning
Program control
7
67
EDK10200EV3 DE/EN/FR 7.1
Note!
ƒ The Global Drive Control easy" software is included on the CD−ROM
Drive PLC Developer Studio".
ƒ The full version of Global Drive Control" can be obtained from Lenze
under the order number ESP−GDC 2.
ƒ A description of how to set parameters using the keypad can be found in
the instructions supplied with each keypad.
ƒ The code table can be found in the online documentation of the
Drive PLC Developer Studio (DDS).
To Next Page
Loading...
