44
EDK94AMH24 DE/EN/FR/ES/IT 1.0
Overview
Standard device Design
Pos. Description HighLine StateLine
MXI1 Module slot for extension 1, e.g. communication ; ;
MXI2 Module slot for extension 2, e.g. communication ;
MMI Module slot for memory modules ; ;
MSI Module slot for safety modules ; ;
X1 System bus (CAN), under the cover ;
X2 24-V supply and state bus ; ;
X3 Analog inputs and analog outputs 2/2 1/0
X4 Digital outputs 4 1
X5 Digital inputs 8 4
X6 Diagnostics ; ;
X7 Resolver ; ;
X8 Encoder ; ;
Lower cap ; ;
Nameplate, retractable ; ;
Upper cap ; ;
EMC clamp 1 1
Warning sticker - place close to the device in a clearly visible manner! ; ;
The LED display enables fast indication of several operating states.
LED Labelling Colour Description
CAN-RUN green CAN bus o.k.
Inoperable when ”StateLine” design is
used
CAN-ERR red CAN bus error
DRIVE READY green Standard device is ready for operation
DRIVE ERROR red Error in the standard device or due to the application
24 V green 24-V supply voltage o.k.
SSP94LED01
USER yellow Message parameterised by the application
Pos. Symbol Description
Long discharge time: All power terminals carry hazardous voltages for at
least 3 minutes after mains disconnection!
High discharge current: Fixed installation and PE connection to EN 61800-5-1
required!
Electrostatic sensitive devices: Before working on the device, personnel must
ensure that they are free of electrostatic charge!
Installation backplane Design
Pos. Description HighLine StateLine
X100 DC-bus voltage (compatible to 9300 series) ;
X105 Motor ;
X106 Motor temperature monitoring ;
X107 Control of motor holding brake Optional
X109 DC busbar +
;
X110 DC busbar -
EMC wire clamp (for device sizes II + III), replaces 1x 1
EMC shield clamp 3or2
DC-bus fuse ;
© 2006 Lenze Drive Systems GmbH, Hans-Lenze-Straße 1, D-31855 Aerzen
No part of this documentation may be reproduced or made accessible to third parties without written consent by Lenze Drive
Systems GmbH.
All information given in th i s documentation has been selected carefully and complies with the hardware and software described.
Nevertheless, deviations cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur.
Necessary corrections will be included in subsequent editions.
To Next Page
Loading...
