Lenze HighLine E94AMHE0094

Wiring the standard device7

62
EDK94AMH24 DE/EN/FR/ES/IT 1.0
Analog inputs / analog outputs
Terminal X3 Labelling Description
GA GND analog signals
AO1 Analog output 1
AO2 Analog output 2
A1+ Analog input 1 +
A1- Analog input 1 -
A1- Analog input 1 -
A1R Terminating resistor for ±20mA
A2+ Analog input 2 +
A2- Analog input 2 -
SSP94000X3

Shield connection: Fix the shield with EMC wire clamp.
Terminal data
Conductor cross-section Tightening torque
[mm
2
] [AWG] [Nm] [lb-in]
Flexible
0.2 ... 2.5
24 ... 12 Spring terminal
With wire end
ferrule
 Note!
The ”StateLine” design provides a modified version of this connection.
Terminal X3 Labelling Description
GA GND analog signals
A1+ Analog input 1 +
A1- Analog input 1 -
A1- Analog input 1 -
A1R Terminating resistor for ±20mA
SSP94SL0X3

Shield connection: Fix the shield with EMC wire clamp.