Lenze MCA Series - Technical Data; Standards and Operating Conditions; Conformities and Approvals; Protection of Persons and Device Protection

Technical data
Standards and operang condions
Conformies and approvals
Conformity
CE 2014/35/EU Low-Voltage Direcve
2014/30/EU EMC Direcve (reference: CE-typical drive system)
EAC TR TC 004/2011 Eurasian conformity: safety of low voltage equipment
TP TC 020/2011 Eurasian conformity: electromagnec compability of technical
means
Approval
cURus UL 1004-1
UL 1004-6
for USA and Canada (requirements of the CSA 22.2 No.100)
Industrial Control Equipment, Lenze File No. E210321
UkrSepro for Ukraine
Protecon of persons and device protecon
Degree of protecon
IP23S EN 60034-5 Forced venlated: MCA20, MCA22, MCA26
IP54 EN 60034-5 Self-venlated: MCA10 ... MCA19, MCA21
Forced-venlated: MCA13 ... MCA19, MCA21 ... MCA26
IP65 EN 60034-5 Self-venlated: MCA10 ... MCA19, MCA21
Temperature class
F (155 °C) EN 60034-1
Max. voltage load
Limit curve A IEC/TS 60034-25:2007
IVIC C/B/B@500V IEC 60034-18-41
EMC data
Noise emission EN 60034-1 A nal overall assessment of the drive system is indispensable
Noise immunity EN 60034-1 A nal overall assessment of the drive system is indispensable
Environmental condions
Climate
1K3 (-20 °C ... +60 °C) EN 60721-3-1 Storage, < 3 months
1K3 (-20 °C ... +40 °C) EN 60721-3-1 Storage, > 3 months
2K3 (-20 °C ... +70 °C) EN 60721-3-2 Transport
3K3 (-20 °C ... +40 °C) EN 60721-3-3 Operaon, without brake, self-venlated
3K3 (-15 °C ... +40 °C) EN 60721-3-3 Operaon, without brake, forced venlated
3K3 (-10 °C ... +40 °C) EN 60721-3-3 Operaon, with brake
Relave humidity≤ 85 % Without condensaon
Site altude
0 … 1000 m amsl Without power reducon
1000 … 4000 m amsl Observe the power reducons of the inverter and the servo motor
Vibraon resistance
3M6 EN 60721-3-3 Operaon
Vibraon severity
A EN 60034-14 MCA10, MCA13, MCA20, MCA22, MCA26
B EN 60034-14 MCA14, MCA17, MCA19, MCA21
Vibraon velocity (free suspension)
1.6 mm/s MCA10, MCA13, MCA20, MCA22, MCA26
0.7 mm/s MCA14, MCA17, MCA19, MCA21
Smooth running, axial runout, concentricity
Normal class IEC 60072 MCA10, MCA13, MCA20, MCA22, MCA26
Precision class IEC 60072 MCA14, MCA17, MCA19, MCA21
Technical data
Standards and operang condions
Conformies and approvals
70