Lenze MCM Series - Electrical Installation; Important Notes; Preparation

Electrical installaon
Important notes
DANGER!
Hazardous voltage!
On the power connecons even when disconnected from the mains: residual voltage >60 V!
▶
Disconnect the product from the mains and wait unl the motor is at a standsll.
▶
Make sure that the product is safely isolated from supply!
•
When working on energised products, comply with the applicable naonal accident
prevenon regulaons.
•
Carry out the electrical installaon in compliance with the relevant regulaons (e.g. cable
cross‐secons, fuses, PE connecon).
•
The manufacturer of the system or machine is responsible for adherence to the limits
required in connecon with EMC legislaon.
Preparaon
The notes for the electrical connecon can be found in the enclosed mounng
instrucons.
EMC-compliant wiring
The EMC-compliant wiring is described in detail in the documentaon of the
Lenze inverters.
Electrical installaon
Preparaon
39