Lenze MCM Series - Page 41

ICN-M23 connector assignment
Incremental and SinCos absolute value encoder Hiperface
Contact Name Meaning
1 B Track B / + SIN
1
2
3
4
5
6
7
8
9
10
11
12
P
Code 20°
2 A¯ Track A inverse / - COS
3 A Track A / + COS
4 + UB Supply +
5 GND Mass
6 Z¯ Zero track inverse / - RS485
7 Z Zero track / + RS485
8 Not assigned
9 B¯ Track B inverse/-SIN
10 Shield Encoder housing shield
11 +
Temperature monitoring: KTY/PT1000
12 -
Assembly of ICN connectors
NOTICE
Live cables!
Destrucon of the connector.
▶
Never remove connector when voltage is being applied!
▶
Disable inverter before removing the connector!
NOTICE
Loss of the protecon class!
Malfuncons may occur.
▶
ICN connector with screwed connecon - do not remove O-ring
▶
ICN connector with SpeedTec bayonet lock - remove O-ring and dispose of it.
1
Mounng
1. When connecng the cable connector to the motor connector, make sure that the aids to orientaon
(pos. 1) are facing each other.
2. Tighten the box nut of the connector!
Electrical installaon
Motor connecon
Connecon via ICN connector
41