2 Safety Notices
2.1 Safety standard
The data transmission unit DLSP has been developed, produced and tested taking
into account the applicable safety standards and is in compliance with the state of
the art.
2.2 Intended use
Attention !
The protection of personnel and device cannot be guaranteed if the device is opera-
ted in a manner not corresponding to its intended use.
Data transmission units of the DLSP series may only be used in areas in which in-
terruption of data transmission, for example as a result of masking of the transmit-
ter or receiver lens, cannot lead to damage or personal injury.
Fields of application The DLSP is particularly suited to the following fields of application:
•
Automatic guided vehicle systems to VBG 12b
•
Rack handling devices, warehouse transport systems etc.
•
Trolley conveyors
•
Optical rotary transfer units
•
Storage and handling systems
•
Optical data storage systems
2.3 Organisational measures
Documentation All specifications made in this technical description, in particular the section "safety
remarks" must be observed without fail.
The technical description should be kept readily accessible at all times.
Safety regulations All applicable legislation and rulings of the relevant professional associations must
also be complied with.
Qualified staff Installation, commissioning and maintenance may only be carried out by suitably
qualified staff.
Electrical work may only be carried out by qualified electricians.
Maintenance and repair All maintenance work on the DLSP must be carried out in accordance with the in-
structions in this manual. Repairs may only performed by the Leuze electronic after-
sales service.
4 DLSP 160S Leuze electronic
To Next Page
Loading...