3
Pre-Treatment
18
PB1
2021-10-25
S023735
Remove the two caps from the air conditioning charge ports.
Connect an approved refrigerant collect and recharge machine to the ports. Examine the
machine manufacturer's instructions for the correct operation of the machine.
Attach the blue hose to the low-pressure valve connection.
Attach the red hose to the high-pressure valve connection.
The valves are Schrader-type, you must make the connection in two steps: Connect the
quick-coupling to the connection. Turn the handle clockwise to make the valves open and make
the refrigerant flow through the connection.
Follow the equipment instructions and fully drain the system.
Tyres - Removal
NOTE
All four of the tyres on the vehicle can be recycled. Some LEVC vehicles are
supplied with a spare wheel. The tyre on the spare wheel can also be recycled.
Remove and discard the hub caps and the outer rings from all the wheels.