Parts to remove before dismantling
4
S023735 PB1
2021-10-25
53
11. Release the two fasteners which attach the door glass - front to the regulator - door glass -
front. Do not remove the two fasteners from the regulator - door glass - front.
12.Carefully remove the door glass - front from the door - front.
13.Do this procedure to the two front doors.
Windscreen
1. Lift the hood.
2. Remove the plenum cover.
3. Remove the sensor - humidity.
4. Remove the module - rain sensor.
5. Remove the module - active safety domain.
6. Remove the interior rear view mirror.
To Next Page
Loading...
