2
Pre-Treatment - First Steps
6
PB1
2021-10-25
S023735
The location of the airbags is shown below.
Isolate the 12 Volt and High Voltage Batteries
Before starting this task:
WARNING
This procedure must only be done by approved personnel.
WARNING
You must do this procedure in the exact sequence shown. Failure to do so
could result in serious personal injury.
WARNING
Make sure that you obey all local legislation when you work with high voltages
and high voltage systems.
WARNING
Approved personal protective equipment includes: safety glasses or visor,
rubber gloves meeting Class 0 or better and non-flammable, non-melting
clothing, must be worn when instructed to do so.
WARNING
Always wear the applicable protective safety equipment when you work with
batteries. Batteries contain poisonous and corrosive acid that can cause body
injuries.
To Next Page
Loading...
Need help?
General
