Pre-Treatment - First Steps
2
S023735 PB1
2021-10-25
9
6. Remove the switch - safety - high voltage battery from the battery - high voltage.
7. Install the blank plug - high voltage battery on the battery - high voltage.
12 Volt Battery - Removal
Before starting this task:
DANGER
You must isolate the battery - 12V and the battery - high voltage before you continue
with this procedure. If you do not isolate the battery - 12V and the battery - high
voltage, it can cause injury, or damage to the vehicle.
To Next Page
Loading...
Need help?
General
