Pre-Treatment
3
S023735 PB1
2021-10-25
23
3. Remove the four wheels.
4. Remove the caps from the rear bleed screws.
5. Remove the caps from the front bleed screws
6. Install the pneumatic brake bleed or other applicable equipment to remove the brake fluid.
NOTE
Follow the manufacturer's instructions for the correct use of the equipment.
Start the brake fluid removal procedure at the right rear bleed screw. Continue the procedure
at the left rear and then in a clockwise direction around the vehicle. You must remove the
brake fluid from all four bleed screws.
To Next Page
Loading...
