Pre-Treatment
3
S023735 PB1
2021-10-25
29
4. Remove the hose.
5. Remove the underframe - midzone.
6. Remove the left liner - wheel arch - rear.
7. Disconnect the pipe - fuel tank vent from the valve - fuel tank isolation. Release the fastener.
Disconnect the pipe - fuel tank vent.
Release the fastener and release the hose - fuel filler from the pipe - fuel filler.
8. Disconnect the pipe - fuel supply from the filter - fuel. Release the fastener.
Disconnect the two electrical connectors. Release the four wiring harness fasteners.
To Next Page
Loading...
