3
Pre-Treatment
36
PB1
2021-10-25
S023735
2.
NOTE
If you can see washer fluid in the reservoir - washer it is necessary to remove
fluid to prevent too much leakage in the subsequent steps. Use applicable
suction equipment to remove the fluid from the reservoir - washer.
Release the washer pipe - rear window 'A' and washer pipe - windscreen 'B' from the pump -
washer fluid.
3. Disconnect the electrical connector from the pump - washer fluid.
4.
CAUTION
Prepare to collect the released fluid.
Release the pump - washer fluid from the reservoir - washer grommet.
To Next Page
Loading...
