LevelOne FCS-3091 - Installation and Setup; Physical Overview and Interfaces

FCS-3091 User’s Manual
5
5
Installation
FCS-3091 – Physical Overview
Interface
Description
Light Sensor
The Light sensor is for detecting IP Camera environmental
illumination, and if IP Camera was in the dark/night
environment, IR Cut Filter is switched off to let infrared light pass
through for clear night view.
MIC
The IP Camera has built-in an internal microphone, which is
hidden in the pinhole located on the front panel.
Speaker
The IP Camera has built-in an internal speaker, which is hidden in
the pinhole located on the front panel.
Reset Button
This button is hidden in the pinhole. For more information,
please refer to page 53 FAQ for Restore Factory Default
instruction.