Network Camera User’s Manual
37/63
means no correction, and 100 (%) means the lum. of corners are equal to the lum. of the
center.
7.Wide Dynamic Range
Enable Wide Dynamic Range auto in different level to improve the exposure
when both bright and dark areas simultaneously in the field of view of the camera.
The default is off.
Infrared Led Setting
1. “Infrared LED Control” IR led for Day and Night (Option). User can turn on/off
the built-in IR led. This function is very useful under low illumination environment.
(1) “Auto” Select IR sensitivity from 0 to 4.
(2) “Manual” Turn on/off the IR led manually.
Video output setting
“Turn on video output” Can switch between NTSC and PAL.
To Next Page
Loading...
