Network Camera User’s Manual
53/63
Syslog
You can configure the Network Camera to send the system log file to a remote
server as a log backup. Before utilizing this feature, it is suggested that the user
install a log-recording tool to receive system log messages from the Network
Camera. An example is Kiwi Syslog Daemon.
Visit http://www.kiwisyslog.com/kiwi-syslog-daemon-overview/.
Remote log setting Advanced Mode
Follow the steps below to set up the remote log:
1. In the IP address text box, enter the IP address of the remote server.
2. In the port text box, enter the port number of the remote server.
3. When completed, select Enable remote log and click Save to enable the setting.
To Next Page
Loading...
