Network Camera User’s Manual
41/63
Schedule information
(1) Enter the “Start time” and “Stop time” for day mode.
Note that the time format is [hh:mm] and is expressed in 24-hour clock time.
(2)“Sun”/“Mon”/“Tue”/“Wed”/“Thu”/“Fri”/“Sat” Select the days of the
week to perform the application.
(3) ―Start day‖ and ―Start time‖ as the start timing the time. ―End day‖ and
―End time‖ as the end timing the time
Record parameters
(1)Source: Select a stream for the recording source.
(2)The recording interval: Select the recording time interval.
(3)Record prefix file name: You can setting the file name, and enable or
disable to add the date and time on file name.
(4)Destination: You can select the SD card or network attached storage (NAS) for
recording video files.
Note: Video record with the Application must be set to the same shared directory
path. If you would like do detail recording settings or multi-channel recording, please
install bundled 64CH recording software in CD.
To Next Page
Loading...
