Network Camera User’s Manual
43/63
Video codec setting
(1) “Select Stream” The Network Camera supports “Stream 1”and “Stream 2”.
(2) “Codec type” The Network Camera supports three kind of video
compression mode: “H.264” or “MPEG4‖ or “MJPEG”. User can choose one of
these compression modes based on requirement or application
(3) “Video size” Click the down arrow to choose the quality of image
(4) “Frame rate” This limits the maximal refresh frame rate per second. Set the
frame rate higher for a smoother video quality.
(5) “Intra frame period” Determine how often to plant an ―I frame‖. The shorter
the duration, the more likely you will get a better video quality, but at the cost of
higher network bandwidth consumption.
(6) “Video Quality type” Setting optimizes bandwidth utilization and video quality.
-- “Constant bit rate” User can adjust the video quality from 20 Kbps to 12
Mbps.
-- “Fixed quality” user can select from highest quality to get best quality
according. The ―Quality‖ are selectable at the following rates: From 1 to 20.
Snapshot and time display setting
Adjust the photo size specifications and choose whether to mark time on
the video and photo.
To Next Page
Loading...
